Aqueous (PK-Required)
Poly/Cotton Blend
NO-LAM
Made in the USA
1
First there was Crystalline, and now there's 17M. Thinner, lighter, and faster to frame; 17M features the same no-varnish coating, scuff protection you have come to expect from Breathing Color's no-varnish line. Combined with 17M's quick dry technology and you have a print-and-stretch solution in just minutes!
| Stop waiting for coatings to cure- 17M is ready to stretch when you are |
| Fine texture for a still and undisturbed surface that opens from wider angles |
| No lamination required means prints are done and ready to stretch in record time |
| Manufactured in Austin- the Art Capital of Texas |
|
Base Composition |
65% polyester 35% cotton |
|
Texture |
Fine (1-over-1) |
|
Finish |
Satin or Gloss |
|
OBA Content |
Moderate |
|
Weight |
360 GSM |
|
Caliper |
17.5 mils |
|
Opacity |
98% |
|
CIE L*a*b* (F7/2) |
Satin: L* 97.70 / a* 1.40 / b* (-2.0) Gloss: L* 97.50 / a* 1.50 / b*(-3.90) |
|
Gloss Level |
Satin: 6 GU |
|
Core Diameter |
44"-wide and smaller: 2" Padded Core |
This product has been compatibility tested and approved for the following printers. If you do not see your printer listed below, it does not mean it is not compatible, but because we cannot list every one of the thousands of compatible printer models. Our aqueous media is compatible with most pigment and dye-based ink systems. If you would like to confirm any unlisted printer is compatible before purchase, please contact support@breathingcolor.com.
Breathing Color strongly recommends checking our ICC Profile Library page to see if we have color management files for your combination of media and printer model. If we are missing an ICC profile, we can advise generic settings and/or work with you to create Custom Profiles.
Your Printer is Compatible!
We recommend letting 17M prints dry for 1-2 hours before mounting or stretching for best results. Note: the dry time may vary depending on factors such as your home temperature, outside climate, and more.
Glossy and satin canvas is more susceptible to curling. This curling is most often caused imperfect atmospheric conditions. Please make sure to remove your roll of canvas from the printer when not being used. Also, be sure to store it inside of the original plastic sleeve and inside of the roll box.
Make sure also to store your print media as close as possible to our recommendations. Storage temperature should be around 70°F (21°C). The relative humidity in your storage room should be about 50%.
To prevent the transfer of oils and dirt from your hands to the coatings on the media, it’s important to take protective measures. White cotton gloves should be worn when handling the media to keep it pristine.
When not using the media, you should store it in its original packaging, exactly how it was shipped to you. Read even more about our recommended handling and storage best practices on our blog.
No! That's the beauty of 17M no varnish canvas as a printer’s medium. Simply print, let it dry for 1-2 hours, and then stretch/mount/frame.
With our 17M Satin/Gloss, you can enjoy a no varnish canvas without headaches or extra steps.
We put padding around each core. This cushions the inner layers of canvas, which prevents creases and grooves from appearing at the end of roll.
Some other canvas and paper brands do not offer this layer of protection. What ensues is common creasing and grooving on the canvas material.
Our 17M is designed and packed with care. Here's how we do it with our no varnish canvas:
Stop wasting the last few feet of your media. Discover 17M Satin/Gloss and use every inch of your no varnish canvas.
Breathing Color's Vibrance photo paper’s finishing begins with Vibrance Gloss, a cockle-free RC photo paper with a mirror-like sheen. Feel the luxurious 260gsm weight and high gloss finish on an instant-dry surface.
Give your art the profile it deserves. Stretch your artwork on thick, generously grained stretcher bar moulding from Breathing Color. Our canvas stretcher bar sticks are made from sustainably sourced pine. They come in a variety of popular stretcher bar moulding lengths, including convertible, gallery, cove, and more.
